2023年12月19日发(作者：)

RE2000, RE2000 v2 and RE4000W 设置指南

The Linksys Dual-Band Wireless-N Range Extenders (RE2000, RE2000 v2 and RE4000W) can be set up either through manual

configuration or using the Setup Wizard. This article will guide you on how to set up your range extender using the Setup Wizard.

Linksys

双宽带无线信号扩展器(RE2000, RE2000 v2 and RE4000W) 可以同时通过手动配置或使用设置向导.这篇文章可以指导你如何通过设置向导来设置。

Before you start the setup process, make sure that you have the following:

在开始设置之前，确保你完成下面几点

The Setup CD that came along with your range extender. If you don’t have an optical drive (CD/DVD ROM) in your

computer, download the Setup Wizard from the Linksys Support Site.

扩展设备附带的CD盘，如果你的电脑没有CD驱动器，从这里下载设置向导Linksys Support Site.

Active 2.4 GHz or 5 GHz wireless network connection

o

o

The RE2000 can detect and work on either a 2.4 GHz or 5 GHz network.

The RE2000 v2 and RE4000W can detect and work on 2.4 GHz and 5 GHz networks simultaneously.

开启2.4GHZ或5Ghz无线连接

RE2000可以检测和工作在2.4 GHz 或5 GHz

RE2000 v2 and RE4000W可以同时检测和工作在2.4 GHz 和5 GHz

Wireless Network Name (SSID)

o

If you have a dual-band router, make sure that the network name of your 2.4 GHz network is different from that

of the 5 GHz network.

无线网络名称

如果有一个双带宽路由器，确保2.4GHz网络和5GHz网络的SSID是不同的。

Password or Security Key

o

For better connection and performance, it is recommended to use the following security types: Wi-Fi Protected

Access (WPA)2/WPA Mixed Mode, WPA2 Personal and WPA Personal.

密码或安全密匙

为了更好的连接和性能，推荐使用的加密方式为：WiFi接入保护： (WPA)2/WPA Mixed Mode,

WPA2 Personal and WPA Personal.

QUICK TIP: The SSID and Security Key are your wireless network’s settings. If you do not have these settings, contact your

router’s manufacturer for assistance in getting them. If you are using a Linksys router, click here to learn how to check your wireless

settings through its web-based setup page. If you're using the Linksys Connect software to check the settings, click here.

快捷提示：SSID和安全密匙属于你的无线网络设置。如果你没有设置，联系你的路由器制造商来帮助设置他们。如果你使用的是Linksys的路由器，点击 here来学习通过网页设置页面来设置你的无线。如果你准备使用Linksys连接软件设置，点击here。

NOTE: If you already tried installing the range extender and encountered an error, you can download the latest setup

software here. You may also need to reset the range extender before you proceed with the steps below. To learn more about

resetting your range extender, click here.

注意：如果你已经厌倦了安装扩展器期间出现的连接错误，你可以下载最新的设置软件here。在进行这些设置之前，你可能需要重置你的扩展器到出厂状态。学习如何重置扩展器点击here。

Step 1:

Insert the Setup CD into your optical (CD/DVD ROM) drive. When the AutoPlay window appears, click the Setup your

Linksys Range Extender option.

第一步：（注意：你需要一台有无线网卡的电脑来运行此软件）

放入设置CD到光驱。当出现AutoPlay 的窗口，点击 Setup your Linksys Range

Extender选项

NOTE: If you have downloaded the Setup Wizard or do not see the AutoPlay window, go to your computer’s local drive and

double-click the icon to proceed.

注意：如果你下载的是设置向导或者没有看到AutoPlay 的窗口，到你的电脑的本地驱动器中双击下面的图标继续。

Step 2:

When the End-User License Agreement window appears, check the I have read and accept the License Terms for using

this software box, and then click Next to continue.

第二步：

当End-User License Agreement 窗口出现，点击 I have read and accept the License

Terms for using this software小框，然后点击继续。

Step 3:

Wait while the software is preparing to set up the wireless connection with your router and range extender.

第三步：（注意：你需要一台有无线网卡的电脑来运行此软件）

出现preparing to set up，等待一会，软件将你的路由器和扩展器通过无线方式来连接。

Step 4:

Once your wireless connection has been detected, plug your range extender into an electrical outlet and then click Next.

第四步：

当你的无线网络被检测到时，将你的扩展器连接到电源插座，然后点击Next。

The software will search for your range extender and will attempt to connect to your wireless network.

软件将搜索你的扩展器并且试图连接到到你的无线网络中。

寻找你的扩展器

QUICK TIP: To make sure that your range extender is easily detected, ensure that it is within close range to the router at this

point of installation.

QUICK TIP：为确保你的扩展器是很容易检测到的，确保扩展器在路由器无线的范围内。

连接到你的扩展器

Once the software connects to your range extender, it will search for available wireless networks.

当软件连接到你的扩展器，它会寻找存在的无线网络。

获取到存在的网络

Step 5:

Select the wireless network name (SSID) of your router and then, click Next.

第五步：

选择你路由器的wireless network name (SSID)，点Next。(RE2000 V2版本会继续有一个同样的选择)

QUICK TIP: If your wireless network is hidden, click My network is hidden then manually enter your wireless network

settings. Click OK then proceed to Step 7.

QUICK TIP: 如果你的无线网络是隐藏的，点击My netword is hidden 然后手动输入你的无线网络设置。点击OK然后到步骤7。

Step 6:

Enter the wireless network’s password if there is any then click OK.

第六部：

如果有，输入无线网络的密码，点击ok.

NOTE: WPA keys are case sensitive (abc is different from ABC). WEP keys are hexadecimal (0-9 and a-f) characters and

are not case sensitive.

注意：WPA 密码是很敏感的（abc 和ABC是不同的）.WEP密码是十六进制（0-9和a-f）字符并且不敏感的。

The screen will display that your range extender is being set up.

屏幕会显示你的扩展器在设置中

设置你的扩展器中

Step 7:

You will be given an opportunity to transfer your range extender to your desired location. Follow the on-screen instructions and

then, click Next.

第七部：

你可以将你的扩展器转移到你希望的地点。根据屏幕上的指示，然后点Next.

The software will check your range extender’s connection to the wireless network.

软件会检测你的扩展器连接到无线网络。

检测你的扩展器到网络。

Step 8:

A window should appear to inform you that your range extender has been set up successfully. Click Close to end the setup

process.

第八步：

会出现一个你扩展器的窗口，显示设置已经完成。点Close来完成设置过程。

NOTE: When you check your wireless network connection, you will no longer see the range extender's name. Instead, it will

show that you are connected to your router.

注意：当你检测你的无线连接时，你将不会再看到扩展器的名称，代替的，它将显示你连接到了你的路由器。