2023年12月29日发(作者：)
启动项修改步骤
一、传统模式安装（legacy only）
on or restart the system and press F1 when prompted to enter Setup.
Boot Manager and press Enter.
Add Boot Option and press Enter.
Legacy Only and press Enter.
Esc to return to Boot Manager.
Change Boot Order and press Enter.
the existing Boot Order and press Enter.
Legacy Only and press the + key to promote it to a position above the
local device which contains the OS. Typically, this would be above Hard Disk 0.
Press Enter.
Commit Changes and press Enter.
Esc to return to Boot Manager.
ESC to System Configuration and Boot Management
Save Settings and press Enter.
Reset System and press Enter.
二、UEFI模式安装：
For SLES 11:
Method 1:只能一次进入系统，下次重启无法自动进入系统
Press F1 to enter the UEFI setup menu.
Select "Boot Manager"
Boot From File
NO VOLUME to boot.
Method 2:设好后，每次重启自动进入系统
Press F1 to enter the UEFI menu.
Select "Boot Manager", "Add Boot Option", "UEFI Full Path Option", "NO VOLUME
".
Input the description, such as "SUSE11 SP1 EFI mode," and commit changes.a
Go to "Boot Manager", "Change Boot Order".
Change the "SUSE 11 SP1 EFI mode" to the first order and commit the changes.
UEFI模式安装：
For RHEL6:
Method 1:只能一次进入系统，下次重启无法自动进入系统
Press F1 to enter the UEFI menu.
Select "Boot Manager", "Boot From File", NO VOLUME
to boot.
Method 2:设好后，每次重启自动进入系统
Press F1 to enter the UEFI menu.
Select "Boot Manager", "Add Boot Option", "UEFI Full Path Option", NO VOLUME
.
Input the description, such as "RHEL 6 EFI mode," and commit changes.
Select "Boot Manager", Change Boot Order.
Change the "RHEL 6 EFI mode" to the first order and commit the changes.
For VMware ESXi 5:只能一次进入系统，下次重启无法自动进入系统
Method 1:
Press F1 to enter the UEFI menu.
Select "Boot Manager", "Boot From File", to boot.
Method 2:设好后，每次重启自动进入系统
Press F1 to enter the UEFI menu.
Select "Boot Manager", "Add Boot Option", "UEFI Full Path Option",
.
Input the description, such as "VMware ESXi 5 EFI mode," and commit changes.
Go to "Boot Manager", "Change Boot Order".
Change the "VMware ESXi 5 EFI mode" to the first order and commit the changes.
For windows：
Method 1：
一次启动系统：F1boot managerBoot From FileNO VOLUME
回车进入系统。
Method 2：
1, 自检进入F1 UEFI, 先检查阵列配置(逻辑盘,物理盘均为正常);
2, 然后进入Boot Manager选项, 选择"Add Boot Option"
3, 选择安装Windows2008的分区, 一般有以下信息, 然后选择进入;
"Ctrl(0x0)/Scsi(0x0,0x0)/HD(1,GPT,*******-****-****)或者UEFI FULL Path/NO VOLUME
LABEL
4, 里面有
5, 在"Input the description"按Enter键输入" Windows boot manager"（根据自己的习惯命名，也可以命名为win2008）
6, 然后选择"Commit Changes"
7, 然后退出选择"save settings"。
8，再次进入Boot Manager，选择Change Boot Order
9，将Windows boot manager（即自己输入的命名） 改成第一位
10，保存退出。
发布评论