2024年1月23日发(作者：)
各位朋友不知道有没有碰到过这样的情况，当你要打开一个EXECL工作表时，突然发现密码忘记了，唯一可做的也许是搞个破解软件来破一下，但针对打开后的工作表保护，一般就很难有效了，复制虽是一种办法，但不少数据（特别是公式较多着），可能就要乱套了，入户才能破解这一类密码呢？不久前在网上发现此精华，与大家共享一下！
利用宏运行方式破解，真的很有效，运行中可能电脑有两分钟无反应，千万不要以为死机了，等等吧！
步骤方法如下：
1. 打开文件
2. 工具---宏---录制新宏---输入名字如：aa
3. 停止录制（这样得到一个空宏）
4. 工具---宏----宏，选aa，点编辑按钮
5. 删除窗口中的所有字符（只有几个），替换为下面的内容：（复制吧）
6. 关闭编辑窗口
7. 工具---宏----宏。选AllInternalPasswords，运行，确定两次，等两分钟，再确定，OK，没有密码了！！
宏内容如下：
Public Sub AllInternalPasswords()
'Breaks worksheet and workbook structure McCormick
'probably originator of base code algorithm modified for coverage
'of workbook structure / windows passwords and multiple passwords
'
'Norman Harker and JE McGimpsey 27-Dec-2002(Version 1.1)
'Modified 2003-Apr-04 by JEM:All msgs to constants,and
'eliminate one Exit Sub (Version 1.1)
'Reveals hashed passwords NOT original passwords
Const DBLSPACE As String = vbNewLine & vbNewLine
Const AUTHORS As String = DBLSPACE & vbNewLine & _
"Adapted form Bob McCormick base code by" & _
"Norman Harker and JE McGimpsey"
Const HEADER As String = "AllInternalPasswords User Message"
Const VERSION As String = DBLSPACE & "Version 1.1.1 2003-Apr-04"
Const REPBACK As String = DBLSPACE & "Please report failure" & _
"to the mming newsgroup."
Const ALLCLEAR As String = DBLSPACE & "The workbook should" & _
"now be free of all password proteection, so make sure you:" & _
DBLSPACE & "SAVE IT NOW!" & DBLSPACE & "and also" & _
DBLSPACE & "BACKUP!,BACKUP!!,BACKUP" & _
DBLSPACE & "Also, remember that the password was" & _
"put there for areason. Don't stuff up crucial formulas" & _
"or date/" & DBLSPACE & "Access and use of some data" & _
"may be an in doubt,don't."
Const MSGNOPWPRDS1 As String = "There were no passwords on" & _
"sheet,or workbook struture or windows." & AUTHORS & VERSION
Const MSGNOPWORD2 As String = "There was no protection to" & _
"workbook structure or windows." & DBLSPACE & _
"Proceeding to unprotect sheets." & AUTHORS & VERSION
Const MSGTAKETIME As String = "After pressing OK button this" & _
"will take some time." & DBLSPACE & "Amount of time" & _
"depends on how many different passwords,the" & _
"passwords, and your computer's specification." & DBLSPACE & _
"Just be patient! Make me a coffee!" & AUTHORS & VERSION
Const MSGPWORDFOUND1 As String = " You had a Worksheet" & _
"Structure or Windows Password set." & DBLSPACE & _
"Thq password found was:" & DBLSPACE & "$$" & DBLSPACE & _
"Note it down for potential future use in other workbooks by" & _
"the same person who set this password." & DBLSPACE & _
"Now to check and clear other passwords." & AUTHORS & VERSION
Const MSGPWORDFOUND2 As String = "You had a Worksheet" & _
"password set." & DBLSPACE & "The password found was:" & _
DBLSPACE & "&&" & DBLSPACE & "Note it down for potential" & _
"future use in other workbooks by same person who" & _
"set this password." & DBLSPACE & "Now to check and clear" & _
"other passwords." & AUTHORS & VERSION
Const MSGONLYONE As String = "Only structure / windows" & _
"protected with the password that was just found." & _
ALLCLEAR & AUTHORS & VERSION & REPBACK
Dim w1 As Worksheet, w2 As Worksheet
Dim i As Integer, j As Integer, k As Integer, l As Integer
Dim m As Integer, n As Integer, i1 As Integer, i2 As Integer
Dim i3 As Integer, i4 As Integer, i5 As Integer, i6 As Integer
Dim PWord1 As String
Dim ShTag As Boolean, WinTag As Boolean
Updating = False
With ActiveWorkbook
WinTag = ProtectStructure Or .ProtectWindows
End With
ShTag = False
For Each w1 In Worksheets
ShTag = ShTag Or tContents
Next w1
If Not ShTag And Not WinTag Then
MsgBox MSGNOPWORDS1, vbInformation, HEADER
Exit Sub
End If
MsgBox MSGTAKETIME, vbInformation, HEADER
If Not WinTag Then
MsgBox MSGNOPWORDS2, vbInformation, HEADER
Else
On Error Resume Next
Do 'dummy do loop
For i = 65 To 66: For j = 65 To 66: For k = 65 To 66
For l = 65 To 66: For m = 65 To 66: For i1 = 65 To 66
For i2 = 65 To 66: For i3 = 65 To 66: For i4 = 65 To 66
For i5 = 65 To 66: For i6 = 65 To 66: For n = 32 To 126
With ActiveWorkbook
.Unprotect Chr(i) & Chr(j) & Chr(k) & _
Chr(1) & Chr(m) & Chr(i1) & Chr(i2) & _
Chr(i3) & Chr(i4) & Chr(i4) & Chr(i5) & Chr(i6) & Chr(n)
If .ProtectStructure = False And _
.ProtectWindows = False Then
PWord1 = Chr(i) & Chr(j) & Chr(k) & Chr(1) & _
Chr(m) & Chr(i1) & Chr(i2) & Chr(i3) & _
Chr(i4) & Chr(i5) & Chr(i6) & Chr(n)
MsgBox tute(MSGPWORDFOUND1, _
"$$", PWord1), vbInformation, HEADER
Exit Do 'Bypass all for…nexts
End If
End With
Next: Next: Next: Next: Next: Next
Next: Next: Next: Next: Next: Next
Loop Until True
On Error GoTo 0
End If
If WinTag And Not ShTag Then
MsgBox MSGONLYONE, vbInformation, HEADER
Exit Sub
End If
On Error Resume Next
For Each w1 In Worksheets
'Attempt clearance with PWord1
ect PWord1
Next w1
On Error GoTo 0
ShTag = False
For Each w1 In Worksheets
'Checks for all clear ShTag triffered to 1 if not.
ShTag = ShTag Or tContents
Next w1
If ShTag Then
For Each w1 In Worksheets
With w1
If .ProtectContents Then
On Error Resume Next
Do 'Dummy do loop
For i = 65 To 66: For j = 65 To 66: For k = 65 To 66
For l = 65 To 66: For m = 65 To 66: For i1 = 65 To 66
For i2 = 65 To 66: For i3 = 65 To 66: For i4 = 65 To 66
For i5 = 65 To 66: For i6 = 65 To 66: For n = 32 To 126
.Unprotect Chr(i) & Chr(j) & Chr(k) & _
Chr(1) & Chr(m) & Chr(i1) & Chr(i2) & Chr(i3) & _
Chr(i4) & Chr(i4) & Chr(i5) & Chr(i6) & Chr(n)
If Not .ProtectContents Then
PWord1 = Chr(i) & Chr(j) & Chr(k) & Chr(1) & _
Chr(m) & Chr(i1) & Chr(i2) & Chr(i3) & _
Chr(i4) & Chr(i5) & Chr(i6) & Chr(n)
MsgBox tute(MSGPWORDFOUND2, _
"$$", PWord1), vbInformation, HEADER
'leverrage finding Pword by trying on other sheets
For Each w2 In Worksheets
ect PWord1
Next w2
Exit Do 'Bypass all for…nexts
End If
Next: Next: Next: Next: Next: Next
Next: Next: Next: Next: Next: Next
Loop Until True
On Error GoTo 0
End If
End With
Next w1
End If
MsgBox ALLCLEAR & AUTHORS & VERSION & REPBACK, vbInformation, HEADER
End Sub
好了，经测试有效，祝各位成功！
发布评论