2024年3月15日发(作者：)

迈瑞监护仪n17使用说明书英文版

the following contents before starting,Monitor

shell is clean and free of so,please clean it as

required.

Enclosures,keys,knobs,interfaces and accessories are free

from mechanical damage and properly connected to various

power cable has no wear and good insulation

performance.

If no AC power is connected,can the device be started

normally?If not,the battery is dead and needs to be charged in

you find any damage or abnormal phenomenon,please

contact the medical engineer of the hospital or the maintenance

personnel of the company immediately for treatment.

t the AC power and press the power switch to start

the a few seconds,the system self checks

successfully and enters.

On the main interface of the monitor,if the self test is

unsuccessful,the instrument will give an contact

the medical engineer of the hospital or the maintenance

personnel of the company immediately for treatment.

this point,the user can operate the monitor through

the control panel.

use,please refer to the following steps to turn off

the monitor.

Confirm to end the monitoring of the nect

cables and sensors between the monitor and the m

whether to save or clear the patient's monitoring

press the power switch to turn off the monitor.