2024年4月15日发(作者：)

teac3300开盘机说明书

teac说明书

篇一：TEAC录音座说明书

TEAC V-5010录音机英文说明书 important（for ers）

The wires in this mains lead are colored in accordance with

the following code: Blue: neutral

Brown: live

As the colors of the wires in the mains lead of this

apparatus may not

correspond with the colored markings identifying the

terminals in your plug, proceed as follows:

The wire which is colored blue must be connected to the

terminal which is marked with the letter N or colored black.

The wire which is colored BROWN must be connected to the

terminal which is marked with the letter Lord colored RED.

In the U.K, this unit is sold without an AC plug.

1. Power switch

press to switch the deck on, the display window will be

illuminated. Press again to turn the deck off.

note: WHEN SWITCHING THE POWER ON AGAIN AFTER SWITCHING IT

OFF,BE SURE TO WAIT FOR MORE THAN

SECONDS.

SENSOR（Remote Control infrared Signal Receptor）

this receives signals from the provided RC393（v-5010） infrared

remote control unit.

3. Linear counter

Indicates recording and playback time in minute and second.

4. Mode indicator

CD sync: lights when cd synchro start is activated.

Rec: lights in the recording mode and flickers during

record muting.

Play: lights during playback and recording. Pause: lights

when the tape is stopped temporarily.

5. Clear button

Pressing the clear button resets the linear counter to aero

（0000）。press this button before starting recording or play

back.

6. Tape length button

Set this to minimize the error in the counter reading. （See

page7.）

7. RTZ button

if this button is pressed, the tape is fast forwarded

or rewound until a counter reading of 00M00S is reached,

then the deck stops.（see page 9）

te Holder

load the cassette here.

monitor button

to change the monitor mode between source and tape, press

this button. the monitor mode is automatically selected in

accordance with the tape operation.

filter button

press this button when making a recording of an fm broadcast

using Dolby NR, the indicator lights. This eliminates the pilot

tone（19khz）and subcarrier tone（38khz）of the fm broadcast

which could affect operation of the dolby noise reduction

system. to release this function, press the MPX FILTER button

again.

NR Selector

off: set to this position when you do not want to use any

noise reduction system.

B: set to this position when making a recording using the

dolly B noise reduction system, or playing back tapes recorded

with Dolby B NR.