2024年6月2日发(作者:)
Updating Camera Firmware
—Macintosh—
Thank you for choosing a Nikon product. This guide describes how to perform this firmware
update. If you are not confident that you can perform the update successfully, the update can be
performed by a Nikon service representative.
See the camera manual for information on camera operations.
Important
The camera may be damaged if power is interrupted or camera controls are operated during the
update. Do not turn the camera off, remove or disconnect the power source, or operate camera
controls during the update. If the update is not completed successfully and the camera becomes
inoperable, take the camera to a Nikon-authorized service representative for inspection.
Get ready
To upgrade the camera firmware, you will need:
• The camera
• A computer equipped with a card reader or card slot
• One of the following camera power sources:
— An AC adapter
— A battery or batteries with sufficient charge to complete the update
• A Nikon-approved memory card that has been formatted in the camera (note that
all data on the memory card will be deleted when the card is formatted; before
formatting the card, back up any data you wish to keep to a computer or other
device)
• The camera User’s Manual
Check the current camera firmware version
The menus displayed on your camera may differ from those shown here.
1
2
Press the
3
Turn the camera on.
to display the menus.
Select Firmware version in the setup menu.
4
The current firmware version will be displayed.
Confirm that the firmware version is the correct
version for this update.
5
“XXXX” is the camera name and “**” the firmware version.
Exit to the setup menu and turn the camera off.
Download and extract the new firmware
Click the I agree - Begin download link on the download site to download the file
“F-XXXX-V**”, where “XXXX” is the camera name and “**” the firmware
version. When download is complete, a disk image will appear on the desktop
containing the files and folders listed below:
发布评论