2024年4月27日发(作者：)
NET-SNMP安装配置手册
NET-SNMP安装配置手册
2008.3.11
张兵
Aaron Cheung
移动互联网事业部第四开发部
东软集团（成都）有限公司
Address：成都都江堰市青城山东软大道1号东软软件园B5楼
Postcode：611844
QQ：375627443
Email：@
Gmail：zhangcqu@
i
NET-SNMP安装配置手册
目 录
第1章 net-snmp安装及配置...................................................................................................1-1
1.1 安装....................................................................................................................................1-1
1.2 设置net-snmp自启动..........................................................................................................1-3
1.3 设置环境变量.....................................................................................................................1-3
第2章 net-snmp测试..............................................................................................................2-3
2.1 本地通过localhost测试.......................................................................................................2-3
2.2 本地通过IP测试..................................................................................................................2-4
2.3 远程通过IP测试..................................................................................................................2-5
第3章 详解..........................................................................................................3-6
3.1 通道控制配置.....................................................................................................................3-7
3.1.1 定义安全体名称.......................................................................................................3-7
3.1.2 定义安全组..............................................................................................................3-7
3.1.3 定义视图..................................................................................................................3-8
3.1.4 向安全组授权相应的视图.........................................................................................3-8
3.2 系统联系人信息..................................................................................................................3-9
3.3 进程检查...........................................................................................................................3-10
3.4 可执行脚本.......................................................................................................................3-11
3.5 磁盘检查...........................................................................................................................3-12
3.6 负载均衡检查...................................................................................................................3-13
3.7 可扩展部分.......................................................................................................................3-14
3.8 通过控制...........................................................................................................................3-15
3.9 其它..................................................................................................................................3-16
第4章 net-snmp指令............................................................................................................4-16
4.4-16
4..4-16
4..4-16
4.4-17
4.4-17
4.4-17
4.4-17
4.4-17
4.4-17
4.4-17
4.4-17
ii
NET-SNMP安装配置手册
4.4-18
4.4-18
4.4-18
4.4-18
4.4-18
4.4-18
4.4-18
4.4-18
第5章 JAVA开发..................................................................................................................5-18
5.1 NET-SNMP采集示例程序（Java）..................................................................................5-18
5.2 NET-SNMP主动发送示例程序（Java）..........................................................................5-20
5.3 运行结果...........................................................................................................................5-21
第6章 Linux常用6-22
6.6-22
6.2 内存..................................................................................................................................6-22
6.3 磁盘..................................................................................................................................6-23
6.4 示例..................................................................................................................................6-23
第7章 示例配置.................................................................................................7-23
iii
NET-SNMP安装配置手册
图目录
图1-1 解压...........................................................................................1-1
图1-2 进入解压后的目录.......................................................................................................1-1
图1-3 configure命令及参数...................................................................................................1-1
图1-4 configure摘要..............................................................................................................1-2
图1-5 编译及安装命令...........................................................................................................1-2
图1-6 添加文件...................................................................................................1-2
图1-7 原文件内容................................................................................................1-2
图1-8 修改后文件内容........................................................................................1-3
图1-9 net-snmp自启动代码...................................................................................................1-3
图1-10 net-snmp环境变量.....................................................................................................1-3
图2-1 本地通过localhost测试................................................................................................2-3
图2-2 本地通过locahost测试后的部分显示结果.....................................................................2-4
图2-3 本地通过IP测试...........................................................................................................2-4
图2-4 本地通过IP测试...........................................................................................................2-5
图2-5 远程通过IP测试...........................................................................................................2-6
图3-1 定义安全体名称........................................................................................3-7
图3-2 定义安全组................................................................................................3-7
图3-3 定义安全组属性表.....................................................................................3-7
图3-4 定义视图...................................................................................................3-8
图3-5 向安全组授权的相应视图..........................................................................3-8
图3-6 系统联系人信息...........................................................................................................3-9
图3-7 进程检查....................................................................................................................3-10
图3-8 可执行脚本................................................................................................................3-11
图3-9 磁盘检查....................................................................................................................3-12
图3-10 负载均衡检查..........................................................................................................3-13
图3-11 可扩展部分..............................................................................................................3-14
图3-12 通过控制..................................................................................................................3-15
图3-13 其它.........................................................................................................................3-16
图5-1 程序执行结果............................................................................................................5-21
i
NET-SNMP安装配置手册
表目录
表3-1 定义安全体名称属性表..............................................................................3-7
表3-2 定义视图的属性表.....................................................................................3-8
表3-3 向安全组授权的相应视图..........................................................................3-8
表6-1 CPU常用6-22
表6-2 内存常用6-22
表6-3 磁盘常用6-23
i
NET-SNMP安装配置手册
第1章 net-snmp安装及配置
1.1
安装
步骤1： 解压
图1-1 解压
步骤2： configure
1）进入源文件目录
图1-2 进入解压后的目录
2）configure
图1-3 configure命令及参数
prefix：net-snmp将要安装的路径
enable-mfd-rewrites：允许用新的MFD重写可用的mid模块
with-default-snmp-version：默认的SNMP版本
with-sys-contact：可以配置该设备的联系人
with-sys-location：该设备的位置
with-logfile：日志文件路径
with-persistent-directory：不变数据存储目录
3)configure摘要
1-1
NET-SNMP安装配置手册
图1-4 configure摘要
步骤3： 编译并安装
图1-5 编译及安装命令
步骤4： 配置
1）将文件复制到/usr/local/net-snmp/share/snmp，并重命名为
图1-6 添加文件
2）将中如图1-7的内容修改为如图1-8所示
图1-7 原文件内容
1-2
NET-SNMP安装配置手册
图1-8 修改后文件内容
【注意】
在编辑可使用空格，但不能使用TAB键，否则会出现错误
1.2
设置
net-snmp
自启动
在/etc/文件的末尾加上如图1-9所示代码
图1-9 net-snmp自启动代码
1.3
设置环境变量
在/etc/profile文件 的export命令前加上如图1-10所示代码
图1-10 net-snmp环境变量
第2章 net-snmp测试
在配置net-snmp的时候，配置了三种情况：本地通过localhost访问、本地通过IP访问、
远程通过IP测试。因此，测试的时候也分三种情况.
2.1
本地通过
localhost
测试
步骤1： 运行如图2-1所示命令
图2-1 本地通过localhost测试
步骤2： 测试后的显示结果如图2-2所示，表示该种情况正常。
2-3
NET-SNMP安装配置手册
图2-2 本地通过locahost测试后的部分显示结果
2.2
本地通过
IP
测试
步骤1： 运行如图2-3所示
图2-3 本地通过IP测试
步骤2： 测试结果如图2-4所示，表示该种情况正常。
2-4
NET-SNMP安装配置手册
图2-4 本地通过IP测试
2.3
远程通过
IP
测试
因为在客户机上的时候，可能没安装net-snmp，因此也就不能运行net-snmp的命令，所以
需要通过第三方软件进行测试。这儿使用的是AdventNet MibBrowser。如图
2-5所示，输入IP地
址、端口及community，选定左边菜单的OID。然后通过菜单【Operations】→【Get】菜单获
取值。
2-5
NET-SNMP安装配置手册
图2-5 远程通过IP测试
第3章 详解
的配置包括通道控制（Access Control）、系统联系人信息（System contact
information）、进程检查（process check）、可执行脚本（executables/scripts）、磁盘检查（disk
checks）、负载均衡检查（load average checks）、可扩展部分（extensible sections）、通过
控制（Pass through control）、其它等部分。
一般情况只需要修改
3.1 的3.1.1 就可以满足常规需求。
【注意】
在编辑可使用空格，但不能使用TAB键，否则会出现错误
3-6
NET-SNMP安装配置手册
3.1
通道控制配置
3.1.1 定义安全体名称
图3-1 定义安全体名称
表3-1 定义安全体名称属性表
字段
source
安全体名称。
注释
定义请求的来源，在IP协议中，这个数据是IP地址。在net-snmp中可以对来
源IP加以控制，但这个特性不是SNMP规定的，是net-snmp扩展的。
community
共同体名称
3.1.2 定义安全组
图3-2 定义安全组
图3-3 定义安全组属性表
3-7
NET-SNMP安装配置手册
字段
注释
安全组名称，如“MyRWGroup”
安全模式，可选值为v1、v2c、usm
安全体名称
3.1.3 定义视图
图3-4 定义视图
表3-2 定义视图的属性表
字段
incl/excl
subtree
mask
注释
视图名，如“all”
对下面的MIB子树是包括还是排除
视图中涉及的MIB子树
掩码
3.1.4 向安全组授权相应的视图
图3-5 向安全组授权的相应视图
表3-3 向安全组授权的相应视图
字段
安全组，如“MyROGroup”
属性
3-8
NET-SNMP安装配置手册
context
match
read
write
notif
上下文，v1、v2c中始终为空
安全模式，可选值为v1、v2c、usm
安全级别，可选值为auth、noauth、priv，v1、v2c中只能为noauth
前缀，指定context如何与PDU中的context匹配，V3使用
授权的读视图
授权的写视图
授权的trap视图
3.2
系统联系人信息
图3-6 系统联系人信息
可以通过如下命令获得联系人信息：
snmpwalk –v 1 –c public localhost system
3-9
NET-SNMP安装配置手册
3.3
进程检查
图3-7 进程检查
可以通过如下命令获得检查进程后的结果：
snmpwalk –v 1 –c pubilc localhsot .1.3.6.1.4.1.2021.2
3-10
NET-SNMP安装配置手册
3.4
可执行脚本
图3-8 可执行脚本
可以通过如下命令获得结果：
snmp –v 1 –c public localhost .1.3.6.1.4.1.2021.8
3-11
NET-SNMP安装配置手册
3.5
磁盘检查
图3-9 磁盘检查
可以通过如下命令获得结果：
snmpwalk –v 1 –c public localhost .1.3.6.1.4.1.2021.9
3-12
NET-SNMP安装配置手册
3.6
负载均衡检查
图3-10 负载均衡检查
可以通过如下命令获得结果：
snmpwalk –v 1 –c public localhost .1.3.6.1.4.1.2021.10
3-13
NET-SNMP安装配置手册
3.7
可扩展部分
图3-11 可扩展部分
可以通过如下命令获得结果：
snmpwalk –v 1 –c public localhost .1.3.6.1.4.1.2021.50
3-14
NET-SNMP安装配置手册
3.8
通过控制
图3-12 通过控制
可以通过如下命令获得结果：
snmpwalk –v 1 –c public localhost .1.3.6.1.4.1.2021.255
3-15
NET-SNMP安装配置手册
3.9
其它
图3-13 其它
第4章 net-snmp指令
net-snmp提供了许多工具使用和调试SNMP，但从我个人的使用来看常用的指令有snmpd、
snmpwalk、snmpget、snmpconf四条指令。下面将所有指令的功能。
4.1 snmpget
模拟SNMP的GetRequest操作的工具。用来获取一个或几个管理信息。用来读取管理信
息的内容。
4.2 snmpwalk
利用GetNextRequest对给定的管理树进行遍历的工具。一般用来对表格类型管理信息进行
遍历。
4.3 snmpconf
生成 snmpd配置文件的工具。用于生成snmpd的各种配置文件，用作模板，以生成用户级
配置文件。
4-16
NET-SNMP安装配置手册
4.4 snmpd
net-snmp开发的主代理程序，包括众多标准MIB的实现，还可以使用子代理进行扩展，是
一个功能强大的SNMP代理。运行snmpd后，操作系统直接具备了SNMP协议支持，可以被
管理站管理。
4.5 snmpgetnext
模拟SNMP的GetNextRequest操作的工具。用来获取一个管理信息实例的下一个可用实
例数据。
4.6 snmpset
模拟SNMP的SetRequest操作的工具。用来设置可以写的管理信息。一般用来配置设备
或对设备执行操作。
4.7 snmpbulkget
模拟SNMP的GetBulkRequest操作的工具。用来读取大块的数据。一般在大量读取大块
数据时使用以提高带宽利用率，并且比使用 snmpget、snmpgetnext、及 snmpwalk有更强的容
错能力，代理会返回尽可能多的数据，比其他命令更有保证。
4.8 snmptrap
模拟发送trap的工具。用来发送模拟Trap。一般用来测试管理站安装和配置是否正确，或
者用来验证开发的Trap接收程序是否可以正常工作。
4.9 snmptrapd
接收并显示Trap的工具。一般用在代理的开发过程中，接收代理发来的Trap，并将PDU
细节打印出来，用来测试Trap发送功能是否正确。
4.10 snmpinform
模拟发送InformRequest的工具。跟snmmptrap类似，用来发送模拟的带应答的Trap，以
测试管理站或自己开发的接收程序。
4.11 snmptable
使用GetNextRequest和GetBulkRequest操作读取表信息，以列表形式显示的工具。
4-17
NET-SNMP安装配置手册
4.12 snmpstatus
使用SNMP实体中读取几个重要的管理信息以确定设备状态的工具。用来简单测试设备状
态。
4.13 snmpbulkwalk
利用GetBulkRequest实现对给定管理树进行遍历的工具。对表格类形管理信息进行遍历读
取。
4.14 snmpdelta
用来监视Interger类型的管理对象，会及时报告值改变情况的工具。用来监测一个设备或开
发中的代理。
4.15 snmptest
一个复杂的工具，可以监测和管理一个网络实体的信息，通过SNMP请求操作与管理实体
通信。
4.16 snmptranslate
将对象名字和标识符相互转换的工具。用于数据格式的对象标识符和可读式字符串的数据名
称的转换。类似于域名和IP地址的关系。
4.17 snmpusm
SNMPv3 USM配置工具。用于SNMPv3的用户管理。
4.18 snmpvacm
为一个网络实体或维护SNMPv3的基于视图访问控制参数的工具。用于维护SNMPv3的视
图访问控制。
4.19 snmpdf
通过SNMP访问并显示网络实体磁盘利用情况的工具。用来监测网络实体的磁盘。
第5章 JAVA开发
5.1 NET-SNMP
采集示例程序（
Java
）
package 4j;
5-18
NET-SNMP安装配置手册
import ption;
import ityTarget;
import ;
import ;
import seEvent;
import nstants;
import ;
import tring;
import ress;
import leBinding;
import tUdpTransportMapping;
import ;
/**
* SNMP管理类
*
* @author 张兵
* @version $Revision 1.1 $ 2008-1-15 下午02:08:25
*/
public class SNMPManage {
// SNMP的空闲CPU百分比的OID
private static final String OID_FREE_CPU = "1.3.6.1.4.1.2021.11.11.0";
/**
* 获得空闲CPU百分比的
OID
*
* @return String
*/
public static String getOID_FREE_CPU() {
return OID_FREE_CPU;
}
/**
* 根据OID得到对应OID的值
* @param address
* @param OID
* @param community
* @return
*/
public String getValueByOID(String address, String OID, String community)
{
try {
// 使用DefaultUdpTransportMapping对象实例化SNMP对象
Snmp snmp = new Snmp(new DefaultUdpTransportMapping());
// 实例化ComunityTarget对象并设置其属性
CommunityTarget target = new CommunityTarget();
munity(new OctetString(community));
sion(n2c);
ress(new UdpAddress(address));
ries(1);
eout(5000);
//
();
// 请求
PDU request = new PDU();
e();
5-19
NET-SNMP安装配置手册
(new VariableBinding(new OID(OID)));
// 响应
PDU response = null;
ResponseEvent responseEvent = (request, target);
response = ponse();
// 分析响应结果
if (response != null) {
if (orIndex() == r
&& orStatus() == r) {
String pause = ponse()
.getVariableBindings().toString();
return pause;
} else {
return "geting is the fail.";
}
} else
{
return "response is null";
}
} catch (IOException ioe) {
tackTrace();
return "geting is the exception.";
}
}
/**
* 主程序
*
* @param args
*/
public static void main(String args[]) {
// 日志
Logger loger = ger("global");
SNMPManage snmpManage = new SNMPManage();
// SNMP地址及端口
String address = "192.168.228.254/161";
// SNMP的共同体
String community = "public";
// 执行getResponse方法并显示在后台
(ponse(address,
_FREE_CPU(), community));
}
}
5.2 NET-SNMP
主动发送示例程序（
Java
）
/**
* 主动发送告警信息
* @param currentime
* @param alarmcode
* @param systemName
* @param content
* @param code
*/
public static void SendSnmpTrap(String currentime, String alarmcode,
String systemName, String content, int code) {
5-20
NET-SNMP安装配置手册
// TODO Auto-generated method stub
("time=:" + currentime);
("alarmcode=:" + alarmcode);
("systemName=:" + systemName);
("content=:" + content);
SnmpVarBindList lgarbage = new SnmpVarBindList();
Bind(new SnmpVarBind(new
SnmpOid(riseOid
+ ".1.1"), new SnmpString(currentime)));
Bind(new SnmpVarBind(new
SnmpOid(riseOid
+ ".1.2"), new SnmpString(alarmcode)));
Bind(new SnmpVarBind(new
SnmpOid(riseOid
+ ".1.3"), new SnmpString(systemName)));
Bind(new SnmpVarBind(new
SnmpOid(riseOid
+ ".1.4"), new SnmpString(content)));
SnmpTrap snmpTrap = null;
if (code == 1) {
snmpTrap = new SnmpTrap(
new SnmpOid(riseOid + ".1"), lgarbage);
} else if (code == 2) {
snmpTrap = new SnmpTrap(
new SnmpOid(riseOid + ".2"), lgarbage);
} else if (code == 3) {
snmpTrap = new SnmpTrap(
new SnmpOid(riseOid + ".3"), lgarbage);
}
try {
munityString("public");
tinationAddress(InetAddress
.getByName(ationAddress));
SnmpV3AdaptorServer snmpV3AdaptorServer = new
SnmpV3AdaptorServer(
nt(ationPort) - 1);
pPort(new Integer(Integer
.parseInt(ationPort)));
();
2(snmpV3AdaptorServer);
} catch (
Exception e) {
(sage());
}
}
5.3
运行结果
图5-1 程序执行结果
5-21
NET-SNMP安装配置手册
第6章 Linux常用OID
Linux常用的OID包括CPU、内存、磁盘三大部分，下面将列出其一般情况下的OID。
6.1 CPU
表6-1 CPU常用OID
Load
1 minute Load
5 minute Load
15 minute Load
CPU
percentage of user CPU time .1.3.6.1.4.1.2021.11.9.0
raw user cpu time .1.3.6.1.4.1.2021.11.50.0
.1.3.6.1.4.1.2021.10.1.3.1
.1.3.6.1.4.1.2021.10.1.3.2
.1.3.6.1.4.1.2021.10.1.3.3
percentages of system CPU time .1.3.6.1.4.1.2021.11.10.0
raw system cpu time .1.3.6.1.4.1.2021.11.52.0
percentages of idle CPU time .1.3.6.1.4.1.2021.11.11.0
raw idle cpu time
raw nice cpu time
.1.3.6.1.4.1.2021.11.53.0
.1.3.6.1.4.1.2021.11.51.0
6.2
内存
表6-2 内存常用OID
Total Swap Size
Available Swap Space
Total RAM in machine
Total RAM used
Total RAM Free
Total RAM Shared
Total RAM Buffered
Total Cached Memory
.1.3.6.1.4.1.2021.4.3.0
.1.3.6.1.4.1.2021.4.4.0
.1.3.6.1.4.1.2021.4.5.0
.1.3.6.1.4.1.2021.4.6.0
.1.3.6.1.4.1.2021.4.11.0
.1.3.6.1.4.1.2021.4.13.0
.1.3.6.1.4.1.2021.4.14.0
.1.3.6.1.4.1.2021.4.15.0
6-22
NET-SNMP安装配置手册
6.3
磁盘
表6-3 磁盘常用OID
Path where the disk is mounted .1.3.6.1.4.1.2021.9.1.2.1
Path of the device for the partition .1.3.6.1.4.1.2021.9.1.3.1
Total size of the disk/partion (kBytes) .1.3.6.1.4.1.2021.9.1.6.1
Available space on the disk
Used space on the disk
.1.3.6.1.4.1.2021.9.1.7.1
.1.3.6.1.4.1.2021.9.1.8.1
Percentage of space used on disk .1.3.6.1.4.1.2021.9.1.9.1
Percentage of inodes used on disk .1.3.6.1.4.1.2021.9.1.10.1
System Uptime .1.3.6.1.2.1.1.3.0
6.4
示例
表6-1、表6-2、表6-3为常用的OID，为了验证OID的有效性及net-snmp的配置、MIB库是
否正确，可以通过如下命令进行验证：
snmpget –v 1 –c “community” target_name_or_ip OID
例如通过如下指令获得硬盘总大小：
第7章 示例配置
#########################################################################
#
# :
# An example configuration file for configuring the ucd-snmp snmpd agent.
#
#########################################################################
#
# This file is intended to only be an example. If, however, you want
# to use it, it should be placed in /usr/local/net-snmp/etc/snmp/.
# When the snmpd agent starts up, this is where it will look for it.
#
7-23
NET-SNMP安装配置手册
# You might be interested in generating your own file using
# the "snmpconf" program (perl script) instead. It's a nice menu
# based interface to writing well commented configuration files. Try it!
#
# Note: This file is automatically generated from .
# Do NOT read the file! Instead, after you have run
# configure & make, and then make sure you read the file
# instead, as it will tailor itself to your configuration.
# All lines beginning with a '#' are comments and are intended for you
# to read. All other lines are configuration commands for the agent.
#
# PLEASE: read the (5) manual page as well!
#
#########################################################################
# Access Control
#########################################################################
# YOU SHOULD CHANGE THE "COMMUNITY" TOKEN BELOW TO A NEW KEYWORD
ONLY
# KNOWN AT YOUR SITE. YOU *MUST* CHANGE THE NETWORK TOKEN BELOW TO
# SOMETHING REFLECTING YOUR LOCAL NETWORK ADDRESS SPACE.
# By far, the most common question I get about the agent is "why won't
# it work?", when really it should be "how do I configure the agent to
# allow me to access it?"
#
# By default, the agent responds to the "public" community for read
# only access, if run out of the box without any configuration file in
# place. The following examples show you other ways of configuring
# the agent so that you can change the community names, and give
# yourself write access as well.
7-24
NET-SNMP安装配置手册
#
# The following lines change the access permissions of the agent so
# that the COMMUNITY string provides read-only access to your entire
# NETWORK (EG: 10.10.10.0/24), and read/write access to only the
# localhost (127.0.0.1, not its real ipaddress).
#
# For more information, read the FAQ as well as the (5)
# manual page.
####
# First, map the community name (COMMUNITY) into a security name
# (local and mynetwork, depending on where the request is coming
# from):
# source community
com2sec local localhost COMMUNITY
com2sec mynetwork NETWORK/24 COMMUNITY
####
# Second, map the security names into group names:
#
v1 local
v2c local
usm local
group MyRWGroup
group MyRWGroup
group MyRWGroup
group MyROGroup v1 mynetwork
group MyROGroup v2c mynetwork
group MyROGroup usm mynetwork
####
# Third, create a view for us to let the groups have rights to:
# incl/excl subtree mask
view all included .1 80
7-25
NET-SNMP安装配置手册
####
# Finally, grant the 2 groups access to the 1 view with different
# write permissions:
# context match read write notif
access MyROGroup "" any noauth exact all none none
access MyRWGroup "" any noauth exact all all none
# -----------------------------------------------------------------------------
#########################################################################
# System contact information
#
# It is also possible to set the sysContact and sysLocation system
# variables through the file. **PLEASE NOTE** that setting
# the value of these objects here makes these objects READ-ONLY
# (regardless of any access control settings). Any attempt to set the
# value of an object whose value is given here will fail with an error
# status of notWritable.
syslocation Right here, right now.
syscontact Me
# Example output of snmpwalk:
# % snmpwalk -v 1 -c public localhost system
# cr.0 = "SunOS name sun4c"
# ectID.0 = OID: 4
# ime.0 = Timeticks: (595637548) 68 days, 22:32:55
# tact.0 = "Me
# e.0 = "name"
# ation.0 = "Right here, right now."
# vices.0 = 72
7-26
NET-SNMP安装配置手册
# -----------------------------------------------------------------------------
#########################################################################
# Process checks.
#
# The following are examples of how to use the agent to check for
# processes running on the host. The syntax looks something like:
#
# proc NAME [MAX=0] [MIN=0]
#
# NAME: the name of the process to check for. It must match
# exactly (ie, http will not find httpd processes).
# MAX: the maximum number allowed to be running. Defaults to 0.
# MIN: the minimum number to be running. Defaults to 0.
#
# Examples:
#
# Make sure mountd is running
proc mountd
# Make sure there are no more than 4 ntalkds running, but 0 is ok too.
proc ntalkd 4
# Make sure at least one sendmail, but less than or equal to 10 are running.
proc sendmail 10 1
# A snmpwalk of the prTable would look something like this:
#
# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.2
# x.1 = 1
# x.2 = 2
7-27
NET-SNMP安装配置手册
# x.3 = 3
# s.1 = "mountd"
# s.2 = "ntalkd"
# s.3 = "sendmail"
# .1 = 0
# .2 = 0
# .3 = 1
# .1 = 0
# .2 = 4
# .3 = 10
# t.1 = 0
# t.2 = 0
# t.3 = 1
# rFlag.1 = 1
# rFlag.2 = 0
# rFlag.3 = 0
# essage.1 = "No mountd process running."
# essage.2 = ""
# essage.3 = ""
# ix.1 = 0
# ix.2 = 0
# ix.3 = 0
#
# Note that the errorFlag for mountd is set to 1 because one is not
# running (in this case an is, but thats not good enough),
# and the ErrMessage tells you what's wrong. The configuration
# imposed in the file is also shown.
#
# Special Case: When the min and max numbers are both 0, it assumes
# you want a max of infinity and a min of 1.
#
# -----------------------------------------------------------------------------
7-28
NET-SNMP安装配置手册
#########################################################################
# Executables/scripts
#
#
# You can also have programs run by the agent that return a single
# line of output and an exit code. Here are two examples.
#
# exec NAME PROGRAM [ARGS ...]
#
# NAME: A generic name.
# PROGRAM: The program to run. Include the path!
# ARGS: optional arguments to be passed to the program
# a simple hello world
exec echotest /bin/echo hello world
# Run a shell script containing:
#
# #!/bin/sh
# echo hello world
# echo hi there
# exit 35
#
# Note: this has been specifically commented out to prevent
# accidental security holes due to someone else on your system writing
# a /tmp/shtest before you do. Uncomment to use it.
#
#exec shelltest /bin/sh /tmp/shtest
# Then,
# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.8
# ex.1 = 1
# ex.2 = 2
7-29
NET-SNMP安装配置手册
# es.1 = "echotest"
# es.2 = "shelltest"
# mand.1 = "/bin/echo hello world"
# mand.2 = "/bin/sh /tmp/shtest"
# ult.1 = 0
# ult.2 = 35
# put.1 = "hello world."
# put.2 = "hello world."
# Fix.1 = 0
# Fix.2 = 0
# Note that the second line of the /tmp/shtest shell script is cut
# off. Also note that the exit status of 35 was returned.
# -----------------------------------------------------------------------------
#########################################################################
# disk checks
#
# The agent can check the amount of available disk space, and make
# sure it is above a set limit.
# disk PATH [MIN=DEFDISKMINIMUMSPACE]
#
# PATH: mount path to the disk in question.
# MIN: Disks with space below this value will have the Mib's errorFlag set.
# Default value = DEFDISKMINIMUMSPACE.
# Check the / partition and make sure it contains at least 10 megs.
disk / 10000
# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.9
7-30
NET-SNMP安装配置手册
# dex.1 = 0
# th.1 = "/" Hex: 2F
# vice.1 = "/dev/dsk/c201d6s0"
# nimum.1 = 10000
# tal.1 = 837130
# ail.1 = 316325
# ed.1 = 437092
# rcent.1 = 58
# rorFlag.1 = 0
# rorMsg.1 = ""
# -----------------------------------------------------------------------------
#########################################################################
# load average checks
#
# load [1MAX=DEFMAXLOADAVE] [5MAX=DEFMAXLOADAVE]
[15MAX=DEFMAXLOADAVE]
#
# 1MAX: If the 1 minute load average is above this limit at query
# time, the errorFlag will be set.
# 5MAX: Similar, but for 5 min average.
# 15MAX: Similar, but for 15 min average.
# Check for loads:
load 12 14 14
# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.10
# eIndex.1 = 1
# eIndex.2 = 2
# eIndex.3 = 3
# eNames.1 = "Load-1"
# eNames.2 = "Load-5"
7-31
NET-SNMP安装配置手册
# eNames.3 = "Load-15"
# eLoad.1 = "0.49" Hex: 30 2E 34 39
# eLoad.2 = "0.31" Hex: 30 2E 33 31
# eLoad.3 = "0.26" Hex: 30 2E 32 36
# eConfig.1 = "12.00"
# eConfig.2 = "14.00"
# eConfig.3 = "14.00"
# eErrorFlag.1 = 0
# eErrorFlag.2 = 0
# eErrorFlag.3 = 0
# eErrMessage.1 = ""
# eErrMessage.2 = ""
# eErrMessage.3 = ""
# -----------------------------------------------------------------------------
#########################################################################
# Extensible sections.
#
# This alleviates the multiple line output problem found in the
# previous executable mib by placing each mib in its own mib table:
# Run a shell script containing:
#
# #!/bin/sh
# echo hello world
# echo hi there
# exit 35
#
# Note: this has been specifically commented out to prevent
# accidental security holes due to someone else on your system writing
# a /tmp/shtest before you do. Uncomment to use it.
#
7-32
NET-SNMP安装配置手册
# exec .1.3.6.1.4.1.2021.50 shelltest /bin/sh /tmp/shtest
# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.50
# s.50.1.1 = 1
# s.50.2.1 = "shelltest"
# s.50.3.1 = "/bin/sh /tmp/shtest"
# s.50.100.1 = 35
# s.50.101.1 = "hello world."
# s.50.101.2 = "hi there."
# s.50.102.1 = 0
# Now the Output has grown to two lines, and we can see the 'hi
# there.' output as the second line from our shell script.
#
# Note that you must alter the file to be correct if you want
# the .50.* outputs above to change to reasonable text descriptions.
# Other ideas:
#
# exec .1.3.6.1.4.1.2021.51 ps /bin/ps
# exec .1.3.6.1.4.1.2021.52 top /usr/local/bin/top
# exec .1.3.6.1.4.1.2021.53 mailq /usr/bin/mailq
# -----------------------------------------------------------------------------
#########################################################################
# Pass through control.
#
# Usage:
# pass MIBOID EXEC-COMMAND
#
# This will pass total control of the mib underneath the MIBOID
# portion of the mib to the EXEC-COMMAND.
7-33
NET-SNMP安装配置手册
#
# Note: You'll have to change the path of the passtest script to your
# source directory or install it in the given location.
#
# Example: (see the script for details)
# (commented out here since it requires that you place the
# script in the right location. (its not installed by default))
# pass .1.3.6.1.4.1.2021.255 /bin/sh PREFIX/local/passtest
# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.255
# s.255.1 = "life the universe and everything"
# s.255.2.1 = 42
# s.255.2.2 = OID: 42.42.42
# s.255.3 = Timeticks: (363136200) 42 days, 0:42:42
# s.255.4 = IpAddress: 127.0.0.1
# s.255.5 = 42
# s.255.6 = Gauge: 42
#
# % snmpget -v 1 -c public localhost .1.3.6.1.4.1.2021.255.5
# s.255.5 = 42
#
# % snmpset -v 1 -c public localhost .1.3.6.1.4.1.2021.255.1 s "New string"
# s.255.1 = "New string"
#
# For specific usage information, see the man/.5 manual page
# as well as the local/passtest script used in the above example.
#########################################################################
# Subagent control
#
# The agent can support subagents using a number of extension mechanisms.
# From the 4.2.1 release, AgentX support is being compiled in by default.
7-34
NET-SNMP安装配置手册
# To use this mechanism, simply uncomment the following directive.
#
# master agentx
#
# Please see the file for more details.
#
#########################################################################
# Further Information
#
# See the manual page, and the output of "snmpd -H".
# MUCH more can be done with the than is shown as an
# example here.
7-35
发布评论